Band Plan Selection |
(Radio Wide, Transmit Power Levels) |
Selects the appropriate 7/800 MHz frequency band - band plan that the radio is licensed to operate under, which then determines which of two Transmit Power Level configuration tables is available to the radio's codeplug. This value applies on a radio-wide basis.
|
In 2007, the Federal Communications Commission's (FCC) 700 MHz band plan rebanded the 7/800 MHz frequency band, in part to allocate the 700 MHz "D-Block" Broadband frequencies for public safety use; however, certain agencies in the U.S. and Canada may have licences / waivers that allow them to use the original 700 MHz band plan. |
|
There are unique Transmit Power Level configurations (records / rows) for each of the possible frequency ranges within a given frequency band; however, only those Transmit Power Level configurations for the frequency band (or bands) supported by the current codeplug will apply and, in some cases, can be modified. See also Primary Frequency Band and Secondary Frequency Band for the frequency band(s) supported by the radio. |
SELECTIONS: |
DEFINITIONS: |
Old |
The original 7/800 MHz band plan (see the Warning), and therefore the original Transmit Power Level Transmit Power Level configurations, are applicable to the radio's codeplug. |
New |
The latest 7/800 MHz band plan (see the Warning), and therefore the Tx Power Level (New Band Plan) configurations, are applicable to the radio's codeplug. |
(When the Primary Frequency Band or the Secondary Frequency Band is "7/800 MHz"),
Or
(when Allow Invalid Frequencies is enabled, and
when 7/800 MHz Used in Codeplug is enabled),
Or
when 700 MHz Enable or 800 MHz Enable is enabled),
Or
(when Allow Invalid Frequencies is enabled, and
Or
when 700 MHz Used in Codeplug or 800 MHzUsed in Codeplug is enabled),
And
when the radio is model / option capable.
